Analysis of Buck-Boost PFC Soft Switching Circuit

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle
Industrial Router Crystal 3.2*2.5mm 3225 26M (26.000MHZ) 12PF 10PPM 20PPM 30PPM
Shunluo tantalum capacitor / main push A type B / partial spot / advantage order / fast delivery

This paper analyzes the equivalence and application range of two single-phase soft-switching circuits, and presents a Buck-Boost soft-switching circuit. The simulation results show that the circuit can realize the output buck-boost power factor correction and realize the soft switching of the switching device.

Buck-boost PFC soft switching circuit topology

Buck-boost PFC soft switching circuit topology

The above is part of the content, see the PDF document for details!

Vertical Mount Power D-SUB Connectors

ANTENK launches series vertical board mount Power-D & Combo-D D-SUB connectors machined contacts.
The ANTENK Power-D & Combo-D mixed contact d-sub connectors straight are designed for rugged / robust applications where both power & signal are required from a single connection. Featuring [Solid-Pin" machined contacts, these connectors offer high reliability performance for the most challenging design applications.

vertical board mount Power-D & Combo-D D-SUB connectors machined contacts applications
The ANTENK vertical mount combo d-sub, mixed contact connector product range is ideal for a multitude of both IP rated and non-rated industry applications. This diverse combo d-sub standard product offering includes up to 13 contact configurations (seen below) engineered for both power & coaxial connector environments such as satellite & weather stations, GPS receivers, transceivers and radio technology applications. Contact us directly for any custom or semi-custom combo d-sub connector project not listed in our standard product offering above.


Features of Vertical Mount D-SUB Connector Machined Contacts
Available in 12 industry standard sizes / positions.
Contact Antenk for other sizes / contact configurations.
Available in 10/20/30/40 amp power contacts, 5 amp signal
Allows signal, high current & high voltage in one connector.
Contacts are pre-loaded into the insulator.

Material of Vertical Mount D-SUB Connector Machined Contacts
Shell: Steel, Nickel plated
Insulator: Glass-Filled Thermoplastic, U.L. 94V-O, Black
Signal Contacts: Machined Copper Alloy, Full Gold Flash
Power Contacts: Machined Copper Alloy, Full Gold Flash

Male High Density Power D Mixed Contact Connectors, Female High Density Power D Mixed Contact Connectors, Male Standard Vertical Mount Power D-SUB Connector, Female Standard Vertical Mount Power D-SUB Connector

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com

Posted on