1, the correct wiring and parameter settings. Be sure to read the manual carefully before installing the inverter, master its usage, precautions and wiring; after installation, set the parameters correctly according to the use.
2. The ambient temperature has a great influence on the service life of the inverter. When the ambient temperature is 10 °C per liter, the life of the inverter is halved, so the problem of ambient temperature and heat dissipation of the inverter must be solved.
3. V/F control is a constant torque adjustment. The vector control increases the output torque of the motor in proportion to the square of the voltage, thereby improving the output torque of the motor at low speeds.
4. If the system is operated by the power frequency/frequency conversion mode, the interlock of the power frequency output and the frequency conversion output should be reliable. Moreover, the pump should be stopped, the power frequency/frequency conversion should be stopped, and then the contactor should be operated. Since the contact sticking and the extinguishing of the large-capacity contactor arc take a certain time, the order and time of the above switching should be considered comprehensively.
5. The problem of external control signal failure. Generally, there are several cases: the signal mode is incorrect, the terminal wiring is incorrect, the parameter setting is incorrect, or the external signal itself has a problem.
6, pay attention to the relationship between speed and head. The choice of the motor and its optimal working segment are important issues. If the inverter runs below 5HZ for a long time, the motor heating becomes a serious problem.
7. The difference between overcurrent trip and overload trip. Overcurrent is mainly used to protect the inverter, and overload is mainly used to protect the motor. Because the capacity of the inverter sometimes needs to be increased by one or two gears than the capacity of the motor. In this case, the inverter does not have to overcurrent when the motor is overloaded. The overload protection is carried out by the electronic thermal protection function inside the inverter. When preset electronic thermal protection, the “current take-up ratioâ€, that is, the ratio of the rated current of the motor to the rated current of the inverter should be accurately preset.
Disposable pods built-in 400 mah battery, non rechargeable; it filled 2ml Salt Nic e liquid capacity, 20mg, 30mg, 35mg, 50mg Nicotine Salt level available.
One 2ml e liquid prefilled is equivalent to 3 packs of cigarettes. Due to the high quality cotton coil, the pod deliver the same quality of flavor from begin to end. Due to auto draw technology, when you connect the pod to vape device, you can easily activate the system with a simple puff.
Available in 12 fruit flavors with real taste, smooth experience, apple, peach, mint, pineapple, red bull, orange, grape, banana
Advantages of E-cigarette
1. No stink of cigarette smoke anymore.
2. Can vape on the bed.
3. No need to get away from the office desk to vape.
4. Vaping in the car at any time, no longer need to purify the air.
5. In most cases, the remaining 20% of a cigarette is tasteless but wasteful to discard, e-cigarette could stop at anytime,anywhere. No ash,don't need an ashtray and won't make a mess.
6. No longer being disliked in public
7. Minimize the health risks you expose yourself with tobacco.
8. The size is much smaller than cigarette cases and lighters.Small body with large capacity.
9. No fire with e-cigarette,no worries about the accidental burns on clothes and hands.
10. The price is much cheaper compare with cigarettes
Flavor Pods,Liquid Pods,E-cig Pods,Single Use Vape,Vape Accessories
Shenzhen Axiswell Technology Co., Ltd , https://www.medhealthycare.com