Top Quality High Voltage 26kv/35kv XLPE Insulated Power Cable

Model NO.: XLPE
Wire Core Material: Red Copper Wire
Certification: ISO, CCC, CE
Model: YJV
Brand: Sieben Electric
Trademark: Sieben Electric
Transport Package: Wooden Drum or Steel Wooden Drum
Specification: 0.5~100
Origin: China
HS Code: 8544601200
Model NO.: XLPE
Wire Core Material: Red Copper Wire
Certification: ISO, CCC, CE
Model: YJV
Brand: Sieben Electric
Trademark: Sieben Electric
Transport Package: Wooden Drum or Steel Wooden Drum
Specification: 0.5~100
Origin: China
HS Code: 8544601200
XLPE Insulated Power Cable (up to 35kV)

Sieben Group is a dedicated Chinese Electric Manufacturer including Cable & Wire, Distribution Box, Cable Accessories and so on.

XLPE Insulated Power Cable is used to transmit electricity on AC 50Hz power transmission and distribution lines with rated voltage 35kV or lower. Compared to PVC Insulated Cable, XLPE insulated electrical conductor boasts excellent electrical and mechanical properties, heat and aging resistance, environmental load resistance and chemical corrosion resistance. The simple and light-weight structure of the electrical cable allows for easy installation.

Standard Compliance for XLPE Insulated Power Cable
  1. GB/T 12706.1-2008 (refer to IEC 60502-1) Rated Voltage 1kV(Um=1.2kV) and 3kV(Um=3.6kV)
  2. GB/T 12706.2-2008 (refer to IEC 60502-2) Rated Voltage 6kV(Um=7.2kV) and 30kV(Um=36kV)
  3. GB/T 12706.3-2008 (voltage grade exceeding IEC 60502) Rated Voltage 35kV(Um=40.5kV)

Working Conditions for XLPE Insulated Power Cable
  1. Max working temperature of the insulated power conductor is 90ºC. In case of a short (lasting less than 5 secs), the max temperature of the cable conductor shall not exceed 250ºC. Environment temperature should be no lower than 0ºC when laying the cable.
  2. Bending radius allowance of XLPE Insulated Power Cable
Single core cable: unarmored cable 20D; SWA cable 15D
Cores Cable: unarmored cable 15D; SWA cable 12D
Notes: D = Practical external diameter of cable.

Type, Description and Application: (Table 1-1)
Table 1-1 Type Description & Application Occasion of cable
Type Description Application Occassion
Cu Al
YJV YJLV XLPE insulation PVC sheath power cable To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside
YJY YJLY XLPE insulation PE sheath power cable
YJV22 YJLV22 XLPE insulation, steel tape armor, PVC sheath power cable To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.
YJV23 YJLV23 XLPE insulation, steel tape armor, PE sheath power cable
YJV62 YJLV62 XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable
YJV32 YJLV32 XLPE insulation, thin steel-wire armor, PVC sheath power cable Be applicable to the well, water inside and fall in the bad soil, the cable can bear the equal dint outside the machine with pull the dint
YJV72 YJLV72 XLPE insulation, have no magnetism thick steel-wire armor, PVC sheath power cable
YJV42 YJLV42 XLPE insulation, thick steel-wire armor, PVC sheath power cable Be applicable to the well, underwater with the bottom of sea, the cable can bear the bigger pressure with lead to pull the dint.
Hint
Specially 		The single-core magnetism material packs the cable is not suitable to use for AC power supply back track, the necessity hour eligibility uses the single-core 62 or 72 type pack the cable.
Disallow the cent to cross the magnetism piping mutually when single-core cable establish, in order to prevent results in the descent that cable transport electric current ability.

Table 1-2 Biggest DC Resistance of cable conductor at 20ºC
Rated cross area(mm2) 0.5 0.75 1.0 1.5 2.5 4 6 10
Cu
(Ω/km) 		Non-tinned 36.0 24.5 18.1 12.1 7.41 4.61 3.08 1.83
Tinned 36.7 24.8 18.2 12.2 7.56 4.70 3.11 1.84
Al (Ω/km) / / / 18.1 12.1 7.42 4.61 3.08
 
Rated cross area(mm2) 16 25 35 50 70 95 120 150
Cu
(Ω/km) 		Non-tinned 1.15 0.727 0.524 0.387 0.268 0.193 0.153 0.124
Tinned 1.16 0.734 0.529 0.391 0.270 0.195 0.154 0.126
Al (Ω/km) 1.91 1.20 0.868 0.641 0.443 0.320 0.253 0.206
 
Rated cross area(mm2) 185 240 300 400 500 630 800 1000
Cu
(Ω/km) 		Non-tinned 0.0991 0.0754 0.0601 0.0470 0.0366 0.0283 0.0221 0.0176
Tinned 0.100 0.0762 0.0607 0.0475 0.0369 0.0286 0.0224 0.0177
Al (Ω/km) 0.164 0.125 0.100 0.0778 0.0605 0.0469 0.0367 0.0291

Table 1-3 Test Voltage and biggest Discharge capacity of cable
Rated Voltage
(kV) 		3.6/6 6/6
6/10 		8.7/10
8.7/15 		12/20 18/30 21/35 26/35
Test Voltage
(kV) 		6.23 10.38 15.05 20.76 31.14 36.33 44.98
Discharge capacity
(Pc) 		10 10 10 10 10 10 10

Table 1-4 AC voltage test of cable
Rated Voltage
(kV) 		0.6/1 1.8/3 3.6/6
3.6/10 		6/6
6/10 		8.7/10
8.7/15 		12/20 18/30 21/35 26/35
Test Voltage
(kV) 		3.5 6.5 12.5 21 30.5 42 63 73.5 91
Test Time
(min) 		5 5 5 5 5 5 5 5 5

Rated Voltage, Number of Cable Cores, and Nominal Cross-section Area: See Table 1-5
Table 1-5 Rated Voltage, Core Numbers & Nominal Cross-section Area
U0/Um
Area mm2 		0.6/1 1.8/3 3.6/6
3.6/10 		6/6
6/10 		8.7/10
8.7/15 		12/20 18/30 21/35 26/35
Core No 1 4-400 25-500 25-500 35-500 35-500 50-500 50-500 FTTH Fiber Optical Fast Connectors

Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design. The hotest products are SC/APC Fast Connectors and SC/UPC Fast Connectors.

Fiber-fiber-optic-sc-apc-LC-fast

FTTH Fiber Optical Fast Connectors,FTTH SC/UPC Fast Connectors,SC/APC Fast Connectors,LC/APC SM Fast Connectors

NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com

Posted on