CNC Marshall Stability Tester
MTSH-15
CNC Marshall Stability Tester
main feature:
1. With overload protection and falling over position protection.
2, easy to operate, accurate test data, stable and reliable performance.
3. The instrument automatically tests, displays and prints the stability and the corresponding flow value, and draws the coordinate curve of the specimen under stress deformation.
3. The test results of 15 sets of test pieces can be stored.
4, large LCD screen display curve and stability and flow value.
5, with manual rise and fall function, the tray can be in the right position.
6. There are two types of flow detection: single and double.
7, equipped with a micro printer.
8, you can choose a large indenter to do the big Marshall test, you can also choose a double indenter to do two kinds of tests.
CNC Marshall Stability Tester
Main Specifications:
1. Rising rate: (50±5) mm/min
2. Indenter diameter: (101.6±0.2) mm
(152.4±0.2) mm
3, the maximum pressure: 30KN 50KN accuracy 1%
4, the flow value range: 0-15.00mm accuracy ± 0.1mm
5. Ambient temperature: ≤30°C.
6, relative humidity: ≤ 85%.
7. Power consumption of the whole machine: no more than 700W.
8, size: 650x480x900mm
9, the instrument net weight: 100kg
10, power supply voltage: 220v
CNC Marshall Stability Tester
main feature:
1. With overload protection and falling over position protection.
2, easy to operate, accurate test data, stable and reliable performance.
3. The instrument automatically tests, displays and prints the stability and the corresponding flow value, and draws the coordinate curve of the specimen under stress deformation.
4, with manual rise and fall function, the tray can be in the right position.
5, equipped with a micro printer.
Computer numerical control Marshall stability tester picture: 
Solder Breadboard,Breadboard For Soldering,Solderable Breadboards,Small Solderable Breadboard
Cixi Zhongyi Electronics Factory , https://www.cx-zhongyi.com