Tender code: CBL_20161115_188824476
Bulletin category: Domestic tender
Tenderee: China Petroleum & Chemical Corporation Changling Branch Funding Source: Others were entrusted by Changling Branch of China Petroleum & Chemical Corporation to openly bid for the Pitbub flowmeter required by the work order. This announcement is issued today. Qualified bidders are invited to register.
1. Bidding number: WZ20161130-3805-1121-B1
2. Project Content: Work Order Project Overview: The project has passed the approval and the funds have been implemented.
3. Name and quantity of tender materials:
No.
Supplies
Quantity
unit of measurement
1
Pitotb Flowmeter FI01001/01003
2.0
2
Pitot Bar Flowmeter FE30602/30903/31001/31002AB
4.0
3
Pittoba Flowmeter FE1408/5408
2.0
4
Pitob flowmeter CL150 8" 304/316L
1.0
5
Pitob flowmeter CL150 10" 304/316L
1.0
6
Pitob flowmeter PN40 DN250 316/316
1.0
7
Pitob flowmeter FT5401/5401D/E
3.0
4. Delivery date and location: January 30, 2017, Changling Branch Supply Office 18 # library
5. Bidder's basic qualification requirements:
5.1 Have the right to independently conclude the contract and the ability to perform the contract, obtain a business license in accordance with the law, business license is in its valid period, business license, tax registration certificate, organization code certificate is complete legal person or other organization with complete three certificates.
5.2. For VAT general taxpayers, there were no illegal records in other procurement activities attended in the past three years.
5.3 With the required material supply capacity and quality control measures, no significant quality problems have occurred during the use of the products provided in the past three years.
5.4 has a good business reputation, a sound financial accounting system, financial status and market behavior is good. It is not under the authority of the competent authority to revoke the business license, revoke the qualifications, suspend business for rectification, cancel the qualifications for the bid, and the property is taken over, frozen, or enter bankruptcy procedures.
5.5 There is no state in which Sinopec Corp. has been suspended from trading due to breach of contract or other reasons.
6. Other major qualification requirements:
6.1 Flowmeter manufacturer (with the whole equipment own production or assembly ability, no labeling).
6.2 The registered capital is not less than 10 million yuan. The profit rate in the last three years is not lower than 0 at least for one year. The asset-liability ratio in the past three years is not higher than 80% for at least one year. The current ratio in the past three years is not less than 1 for at least one year. The annual sales amount is not less than RMB 20 million.
6.3 Provide a copy of the quality management system certificate and the certificate is valid. Foreign products are required to provide a type approval certificate for measuring instruments (as issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China). Domestic products are required to provide a production license certificate for product measuring instruments prescribed by the state and the certificate is valid within the validity period.
6.4 Technical Standards for Execution of Standards See Chapter 8 List of Demand for Goods and Technical Specifications
6.5 must have a numerical control machine tool, material analysis spectrometer or handheld spectrometer, provide throttle device (Bitoba flow meter) calculation software screenshot and provide equipment on-site operation picture
The amount of sales in 6.6 years is not less than 20 million yuan. At least two successful performances in similar equipment in the petrochemical industry (performance refers to hydrogenation of similar devices, flare gas). A copy of the contract must be provided in the bidding document (price and amount can be omitted),
6.7 The promised response time after receiving customer service and service requirements is less than 48 hours. A letter of commitment signed by a legal representative or an authorized representative and affixed with an official seal must be provided.
6.8 The company does not have the circumstances of revoking business licenses, revoked qualifications, suspension of rectification, cancellation of bids, assets taken over, bankruptcy, etc. A letter of commitment signed by a legal representative or an authorized representative and affixed with an official seal must be provided.
6.9 The products provided in the past three years have not been subject to serious breach of contract or major liability accidents during use, there are no adverse pollution incidents affecting the environment during the production process, and there have been no incidents of punishment due to environmental violations. A letter of commitment signed by a legal representative or an authorized representative and affixed with an official seal must be provided.
6.10 There are no other non-conformities stipulated by laws and regulations in the past three years. A letter of commitment signed by a legal representative or an authorized representative and affixed with an official seal must be provided.
6.11 Manufacturers fail to obtain ISO 9001 or GB/T 9001 quality system certification
6.12 The maximum number of items that do not meet the key technical conditions in the bidding documents or deviate from other technical conditions exceed the requirements in the bidding documents
7. Comply with other conditions stipulated by laws and regulations.
8. Detailed requirements are detailed in the bidding documents.
9. This tender accepts the application from the manufacturer (manufacturer), does not accept the agent's bid, and does not accept the distributor's bid.
10. The tender does not accept the consortium bid.
11. Evaluation method: Comprehensive evaluation method.
12. The cost of bidding documents: The bidding documents cost 1,000 yuan, which is purchased online and the tender documents are not refundable after sale.
13. Bidding documents Sale time: From 11:00 on November 15, 2016 to 17:00 on November 23, 2016 (Beijing time, the same below).
14. Bidding Document Sales Method: The bidding documents are taken online and online. (.)
16. Deadline for submission of bids: 09:00 on 08 December 2016
17. Opening time: 08 December 2016 at 09:00
Contact: Zhang Jie
Mobile:
phone
fax
E-mail:
In order to ensure that you can bid smoothly, please consult the bidding agency or the tenderer for detailed requirements for bidding before bidding or purchasing the bidding documents. The specific requirements and project conditions shall be interpreted by the bidding agency or the tenderee.
Lv 3Ph Asynchronous Motor,Three Phase Asynchronous Motor,3 Phase Asynchronous Motor,Asynchronous Motor 3 Phase
Yizheng Beide Material Co., Ltd. , https://www.beidevendor.com