Generally, the welding of the steel frame should first weld the weld between the web and the gusset plate, and then weld the weld between the upper and lower chords and the gusset plate. The welding order should not be concentrated, but should be separated and welded between the nodes. The welding sequence is shown in Figure 11-8 .
   Figure 11-8 Steel frame welding sequence
   The transverse joint between the gusset plate and the rod is not welded, and all kinds of welds should be welded as much as possible, as shown in Figure 11-9 .
Conecting Terminals Without Screws
Conecting Terminals Without Screws,Cold Pressing Terminals,Low Pressure Cold Shrinkage Terminal,Cold Shrinkage Cable Terminals
Taixing Longyi Terminals Co.,Ltd. , https://www.longyiterminals.com