Recently, Vishay Intertechnology, Inc. announced the launch of a new series of automotive grade film chip resistors in the 0402, 0603 and 0805 form factors - MCS 0402 HP, MCT 0603 HP and MCU 0805 HP. These resistors have the highest rated power dissipation in the industry. . The Vishay Beyschlag MC HP Series devices are used in automotive, industrial and renewable energy applications with an operating temperature of +175 ° C and a load life drift of less than 0.2% after 1000 hours of rated dissipation.
The MCS 0402 HP, MCT 0603 HP and MCU 0805 HP are rated for power dissipation up to 0.4W, which is twice the standard film chip resistor of the corresponding form factor and exceeds the power dissipation of the next largest form factor device. This allows designers to replace larger devices with small resistors or replace multiple resistors of the same size, saving space, reducing component count, and reducing cost.
The devices introduced this time are AEC-Q200 certified, with resistance values ​​from 1Ω to 100kΩ, TCR as low as ±25ppm/K, and tolerances as low as ±0.1%. The MC HP Series has excellent temperature cycling stability and excellent sulfur resistance is certified by ASTM B 809. The device is lead-free and RoHS compliant and is suitable for processing on automated patch assembly systems.
MCS 0402 HP, MCT 0603 HP and MCU 0805 HP are the best choice for modern electronics in most scenarios where power dissipation, reliability, stability and reliable design are top priorities. Typical applications include DC/DC converters, power supplies, motor and electronic control units, inverters, and test and measurement equipment.
Lightweight, Reusable Goggles, Indirect Vented (Splash proof)
Clear Vision with a Wide Flange and Latex-free
Vents reduce fogging for extended wear.
Fits over most prescription glasses.
Screened top and bottom ports circulate air
Feature:
1.Material:The parts the wearer touches are not made of materials that can cause skin irritation
2.Structure:Smooth surface, no burr, no acute Angle and other defects that may cause eye and face discomfort.
It has good air permeability.
Adjustable parts and structural parts are easy to adjust and replace.
3.Package:The products are properly packaged and are accompanied by product certificates and instructions
4.fixing band : The minimum width of the headband in contact with the wearer is 11.5mm. The headband is adjustable, soft and durable
5.The appearance quality of the lens: the surface of the lens is smooth and free from scratches, ripples, bubbles, impurities, and other obvious defects that may impair vision
6.Diopter: 0.04D
7.The difference between the prism degrees of the left and right eye lenses: 0.12
8.Visible light transmission ratio: colorless transparent lens 89.35
9.Impact resistance: qualified
10.Protection performance of chemical fog drops: there is no color spot on the test paper within the center of the lens
11.Irritant gas protection performance: there is no color spot on the test paper within the center of the lens
Eye Goggle,Safety Goggles Price,Eye Surgery Goggles,Medical Safety Goggles
Guangzhou HangDeng Tech Co. Ltd , http://www.hangdengtech.com