Smart ZigBee Wireless Gateway Features

Performance characteristics

ZigBee wireless gateway has many products, but its main functions are the same. The following takes the example of WL Gateway 02 (Local Area Network) of Nanjing Wulian Sensing Technology Co., Ltd. as an example.

WL Gateway Type 02 (Local Area Network) is a communication device based on the ZigBee protocol. The product provides a standard Ethernet interface that can connect a ZigBee wireless network to a local area network or the Internet. Through the wireless gateway, users can use a variety of mobile smart terminals to easily control any Nanjing-based Zigbee protocol-based products and now secure and reliable wireless data transmission.

The product has a wide range of applications in the Internet of Things and is the core product of the ZigBee network protocol. It has the following features: support ZigBee HA protocol; small size, simple structure, easy to use; built-in 2.4GHz, 6dB omnidirectional antenna; save and run through special software settings; smart access, safe and reliable; stylish and elegant, suitable for many Application site.

The main technical parameters

The main technical parameters of WL Gateway 02 (Local Area Network) are as follows.

Communication method : IEEE802.15.4 (ZigBee).

Communication distance : 1000m (under visual conditions).

Network access method : wired network.

Transmission power : max18dBm.

Receiver sensitivity : -90dBm.

Power Requirements : DC 5V.

Operating temperature : -10 to +55°C.

Weight : 331g.

Net weight : 160g.

Installation and commissioning

The steps to install and debug the WL Gateway Type 02 (LAN) wireless gateway are as follows.

1. Turn on the power and plug in the network cable

Insert the 220V AC power adapter into the power adapter configured with WL Gateway Type 02 (Local Area Network), and insert one end into the SV power jack. At this time, the power indicator on the gateway is lit, indicating that the power supply is normal. Then use a network cable to insert the Ethernet interface. If the Ethernet configuration is correct, the Ethernet indicator on the gateway will turn on, indicating that the Ethernet connection is normal and the power is on.

2. Install the software on your smartphone

Users can choose to download and install the corresponding APP operating software according to different mobile smart terminals. There are different channels for downloading software, and some can be directly downloaded from the official website of the official website. You can also log in to the websites of the agents around the world to download it. After logging in to the website, you can use the interface on the mobile phone, and then click APP below to experience it. The software prompts for each version will be displayed. Click the smart home V5 software to download it. Then follow the instructions of each version of the software to perform the installation operation.

3. Use a smartphone to scan the user ID and join the LAN

WL Gateway Type 02 (LAN) wireless gateway has the user ID code of the product on the back. After downloading the corresponding Appi software with the smart phone, it scans the QR code on the wireless gateway to obtain 1 yard of the wireless gateway, which is to make the smart The mobile phone recognizes the WL Gateway 02 wireless gateway and scans the user ID code with the smart phone.

4. Network settings

1) Establish the network for the first time. On the back of the Wl Gateway 02 gateway, press the multifunction key six times. At this time, the ZigBee network indicator on the gateway blinks quickly. After the establishment is completed, the ZigBee network indicator will turn off after 2s. Then start Is flashing once, indicating that the ZigBee network is working properly.

2) When the multifunction key is tapped 4 times, the ZigBee network setting lamp on the gateway will be lit brightly to allow other devices to join the network. By default, the gateway allows other devices to join the network for 4 minutes. After the arrival time, the ZigBee network setting light goes out.

3) When the multifunction key is clicked three times, the ZigBee network setting on the gateway goes out, indicating that the new device is not allowed to join the network.

4) Click the reset button to reset the device; if you press and hold the reset button for 10 seconds, the gateway will restore the factory settings.